We use cookies. If you continue without changing your settings, you agree to use them and store in your device memory. However, if you would like to, you can manage cookies by yourself by changing your browser settings.

Products VENTO® Pillar

Functional pillars VENTO® are creating new possibilities in advertising, as they do not need constant access to electricity!

This advertising carrier can be displayed successfully outdoors in the open air, same as indoors in closed objects during different kind of events.

Every VENTO® pillar consists from exchangeable polyester cover.
Exchangeable sheathing is a great resolution for recurring events.

Constant pressure pillar VENTO® is perfect in advertising, as It doesn't require use of ventilator (blower). Advertising pillars VENTO® are the primary solution there, where is complicated access to electricity.


Structure VENTO® pillar:

  • constant pressure insert (very durable polyester material, covered by PVC from both sides, fire resistant 500g/m2),
  • firm base on the bottom of pillar,
  • exchangable cover / sheathing (polyester material 220g/m2) with graphics (sublimation printing),
  • integrated transport bag,
  • hand pump,
  • mounting equipement (anchors, ropes, hammer, operating manual).

Basic equipment

Mounting equipement: anchores, ropes, hammer, operating manual. Ropes are available in 7 colors to choose from: white, black, yellow, orange, red, green and blue.

Stabilising base made from composite.

Hand pump. Two-stroke hand pump with an aluminum handle and a rubber seal to protect against ingress of sand into the piston. Works while moving up and down. The pump has a function to pump the air inside and letting it out.
Volume: 2x2L
Pressure max .: 800 mbar (11.6 PSI)
Dimensions: 11 x 22 x 45 cm

 

Additional equipment

Electrical Pump.
Efficiency 1700l/min
Pressure max .: 250 mbar (3.6 PSI)
Power: 1000 W
Dimensions: 15 x 16 x 17 cm

 

Constant pressure VENTO® Pillar
height [m] diameter [m]
2,00 0,45
2,50 0,45
3,00 0,60
3,50 0,60
4,00 0,95

.

 



Accessories

  • Handy mounting kit included in every tent and VENTO gate.
  • Transport bag for constant pressure pillar.
  • Colorful tension ropes.
  • Hand pump - tents, pillars and exhibition counters basic equipment.
  • Balance base for gates and VENTO pillars - used on hard ground.

Mounting equipment

Every VENTO® tent and gate is equipped in basic mounting accessories

Set contains: anchors (stright and screwed), ropes, hammer, hand pump, operating manual and transport bag.

Category: basic equipement.

 

 

 

Transport bag - pillar

Built-in transport bag with detachable handles.

Category: standard equipment.

Colorful ropes

Play with colors and choose color of the ropes!

You can select from 6 colors: yellow, orange, red, green, blue and black. There are white ropes in the standard mounting set.

Category: standard equipment.

Hand pump

Two-stroke hand pump with an aluminum handle and a rubber seal to protect against ingress of sand into the piston. Works while moving up and down. The pump has a function to pump the air inside and letting it out.


Volume: 2x2L
Pressure max .: 800 mbar (11.6 PSI)
Dimensions: 11 x 22 x 45 cm


Category: basic equipement.

Balance base

Balancing panel is recommended especially when using anchors is impossible (like sport hall, hard and compact ground). Base is made of steel, it stabilize and protects the gate (pillar) from falling.

Dedicated base weights:

  • 9,30 kg for S size gates and 2,00 and 2,50 m high pillars,
  • 11,60 kg for table,
  • 17,00 kg kg for M size gates and 3,00 and 3,50 m high pillars,
  • 30,00 kg for L size gates and 4,00 m high pillars.

You need to apply 2 balance bases to the gate (one base for every leg).

Category: additional equipment.