We use cookies. If you continue without changing your settings, you agree to use them and store in your device memory. However, if you would like to, you can manage cookies by yourself by changing your browser settings.


Constant pressure gate VENTO does not require constant access to electricity! Fill up the gate with air and set It up wherever You want!

Enjoy the silence!

Gate Vento is a constant pressure product and does not require ventilator.

One gate, so many opportunities!

Gates from line VENTO® gives new perspectives in highly understandable advertising and events trade. Products VENTO® can be used successfully outdoors same as indoors. Gate VENTO® does not require ventilator (blower), thanks to which It is a very quiet advertising carrier.

Adjust the gate for Your needs: order gate VENTO® Basic (basic option) or VENTO® Plus (expanded version with exchangable cover).


Basic VENTO® gate

Plus VENTO® gate

Brama VENTO® Basic z rzepami Brama VENTO® Plus z wymiennym poszyciem

without printing

exchangeable cover
with graphics

Printing technology: sublimation printing.

Variety of coloured fabrics for exchangable cover (without printing):


Basic assembly equipment:

- constant pressure module,
- exchangeable cover (applies to gate VENTO Plus),
- eletctric pump (1000 W),
- firm base integrated transport bag,
- repairing kit (glue + patch),
- mounting equipemant: anchores, ropes and operating manual.

Accessories for VENTO® gate:

  VENTO® Basic VENTO® Plus
exchangeable cover with graphics - yes
hook and loop fields yes yes
advertising banners with velcro yes yes
advertising banners hanged on eyelets - yes
colored fabrics -



Constant pressure VENTO® gate
Size S M L
external dimensions 4,40 x 2,95 m 6,20 x 3,60 m 7,90 x 4,45 m
internal dimensions 3,50 x 2,50 m 5,00 x 3,00 m 6,00 x 3,50 m
leg diameter 0,45 m 0,60 m 0,95 m
length skid 2,00 m 3,00 m 4,00 m
hook and loop fields on cross-beam 2,00 x 0,50 m 3,00 x 0,75 m 3,50 x 1,00 m
hook and loop fields on legs 0,50 x 1,50 m 0,75 x 2,00 m 1,00 x 2,00 m
hook and loop fields on slants 0,50 x 0,50 m 0,75 x 0,75 m 1,00 x 1,00 m

Gate VENTO® weight

(without equipment)

18 kg 21 kg 53 kg

Gate VENTO® weight

+ equipment

25,3 kg 28,3 kg 60,3 kg

Gate VENTO® Skids weight

(without equipment)
13,5 kg 24,5 kg 48 kg


Templates for constant pressure gate:


Operating manual constant pressure gate.




  • Handy mounting kit included in every tent and VENTO gate.
  • Transport bag built in constant pressure VENTO gate.
  • Colorful tension ropes.
  • Hand pump - tents, pillars and exhibition counters basic equipment.
  • Electric pump - VENTO gate basic equipment.
  • Balance base for gates and VENTO pillars - used on hard ground.

Mounting equipment

Every VENTO® tent and gate is equipped in basic mounting accessories

Set contains: anchors (stright and screwed), ropes, hammer, hand pump, operating manual and transport bag.

Category: basic equipement.




Transport bag - gate

Zippered and built into the gate transport bag.

Category: standard equipment.

Colorful ropes

Play with colors and choose color of the ropes!

You can select from 6 colors: yellow, orange, red, green, blue and black. There are white ropes in the standard mounting set.

Category: standard equipment.

Hand pump

Two-stroke hand pump with an aluminum handle and a rubber seal to protect against ingress of sand into the piston. Works while moving up and down. The pump has a function to pump the air inside and letting it out.

Volume: 2x2L
Pressure max .: 800 mbar (11.6 PSI)
Dimensions: 11 x 22 x 45 cm

Category: basic equipement.

Electric pump

Electrical pump- with power 1000 W, that allows to pump up tent VENTO in just 5 minutes!

Efficiency 1700 l/min
Pressure max .: 250 mbar (3.6 PSI)
Dimensions: 15 x 16 x 17 cm

Category: basic equipement for gate, additional equipement for tent, pillar, table, counter and chair.


Balance base

Balancing panel is recommended especially when using anchors is impossible (like sport hall, hard and compact ground). Base is made of steel, it stabilize and protects the gate (pillar) from falling.

Dedicated base weights:

  • 9,30 kg for S size gates and 2,00 and 2,50 m high pillars,
  • 11,60 kg for table,
  • 17,00 kg kg for M size gates and 3,00 and 3,50 m high pillars,
  • 30,00 kg for L size gates and 4,00 m high pillars.

You need to apply 2 balance bases to the gate (one base for every leg).

Category: additional equipment.